Cookie Img Back to top
Home » Products » Nano Emulsion Degreaser » Nano Emulsion Degreaser

Nano Emulsion Degreaser

Nano Emulsion Degreaser
Nano Emulsion Degreaser
Send Inquiry
Product Code : 05
Product Description

Nano Emulsion Degreasing Chemical

We are presently associated with the Inventor and Patent Holder of Nano emulsion surfactant based from Malaysia.
They have successfully commercialized their proprietary product in various Petronas owned oil fields in Malaysia. This Proprietary Product is presently being used to enhance the recovery of left over well deposit in decommissioned oil wells which basically can be between 20 to 40% of wells’ capacity. This process is referred to as Oil Well Rejuvenation (EOR, Enhance Oil Recovery).
In addition, our Proprietary Product & Contractual capabilities include Specialty crude Oil Tank Cleaning and Recovery of oil from the tank bottom and oil sludge. Utilising our technologies, we are able to increase the Viscosity of Crude oil thereby enabling easy pumping and transportation of this crude oil which presently is unrecoverable economically.
JVK Resources Pte Ltd is a Singapore Based Company and we hold the Global Distribution Rights to market the product in Singapore, Indian continent and then rest of the world with the exception of the country of Malaysia.

Nano Emulsion Surfactant Products

  • JVK Clean 100 is an environmental friendly, biodegradable and low toxicity multipurpose cleaner.
  • JVK Clean100 is formulated based on renewable chemistry specifically for reducing interfacial tension, near wellbore treatment, removal of organic scale dispersant/ dissolver, and wax.
  • JVK Clean 100 can be incorporated with fresh and seawater or acids and alkaline.


  • Biodegradable and environmental friendly. No recognized carcinogens
  • Formulated from 100% renewable natural raw materials  Tolerate with fresh and sea water.
  • Neutral pH and non-corrosive.
  • Phosphate, caustic, silicate and sulphate free formulation.

Dilute JVK Clean 100 according to the recommended working concentration based on the degree of contamination. JVK Clean 100 clean contaminant immediately and the surface can be rinsed with water right after the detergent solution without soaking of the surface into detergent solution. The cleaner can be applied to the soiled surface using the common washing tools such as pressure washer, brush, sponge, mop and etc when necessary


  • JVK Clean 130 is a concentrated single phase nano-emulsion product
  • JVK Clean 130 is special formulated for improving oil flowability, oil removal from contaminated surfaces, and effective grease, wax dispersant.
  • JVK Clean 130 can mix with acid, strong alkaline, viscosifier, and solvent for effective cleaning when needed.


  • Biodegradable and environmental friendly
  • No recognized carcinogens
  • Formulated from 100% renewable raw materials
  • Rapid wetting and effective penetration into grease and oil stain.
  • Neutral pH and not corrosive.
  • Phosphate, caustic, silicate and sulphate free formulation.


JVK Clean 130 can be used as neat or diluted with solvent as carrier. Recommendation working concentration of JVK Clean 130 in carrier solvent is 2% to 20%. Carrier solvent can be kerosene, base oil, slop oil, waste oil, heavy fuel oil or any hydrocarbons and alcohol.
Soaking or direct cleaning with pressure can be done. When using aqueous base as carrier solvent, the recommended working concentration is 5% to 50%. Phase separation or cloudy emulsion may observe when using aqueous base carrier such as fresh water, sea water, recycle water and etc. When using aqueous base carrier, it is advice to blend, mix or stir and continue provide turbulent when cleaning. Soaking is not recommended when using aqueous base carrier