Cookie Img
Back to top
Home » Products » Oil Tank Cleaning Degreaser » Oil Tank Sludge Remover

Oil Tank Sludge Remover

Oil Tank Sludge Remover
Oil Tank Sludge Remover
Product Code : OTSR03
Brand Name : JVK CLEAN 130
Product Specifications
  • Physical Form
  • Liquid
  • Usage
  • JVK Clean 130 is special formulated for improving oil flowability, oil removal from contaminate surfaces, and effective grease, wax dispersant.
Product Description

 

PRODUCT DESCRIPTION

ï‚· JVK Clean 130 is a concentrated single phase nanoemulsion product

ï‚· JVK Clean 130 is special formulated for improving oil flowability, oil removal from contaminate surfaces, and effective grease, wax dispersant.

ï‚· JVK Clean 130 can mix with acid, strong alkaline, viscosifier, and solvent for effective cleaning when needed.

FEATURES AND BENEFITS

ï‚· Biodegradable and environmental friendly

ï‚· No recognized carcinogens

ï‚· Formulated from 100% renewable raw materials

ï‚· Rapid wetting and effective penetration into grease and oil stain.

ï‚· Neutral pH and not corrosive.

ï‚· Phosphate, caustic, silicate and sulfate free formulation.

APPLICATION

JVK Clean 130 can be used as neat or diluted with solvent as carrier. Recommendation working concentration of JVK Clean 130 in carrier solvent is 2% to 20%. Carrier solvent can be kerosene, base oil, slop oil, waste oil, heavy fuel oil or any hydrocarbons and alcohol. Soaking or direct cleaning with pressure can be done.

When using aqueous base as carrier solvent, the recommended working concentration is 5% to 50%. Phase separation or cloudy emulsion may observe when using aqueous base carrier such as fresh water, sea water, recycle water and etc. When using aqueous base carrier, it is advice to blend, mix or stir and continue provide turbulent when cleaning. Soaking is not recommended when using aqueous base carrier.

Please refer to user SOP for various applications with JVK Clean 130.

If excessive foam observed and not tolerable, please ask for low foam version from JVK Resources technical personal.

TYPICAL PROPERTIES

Properties Specification

Form Liquid

Specific Gravity (25oC) 0.85-0.95

pH (1%) 6.5-10.0

Flash Point ≥0 oC

MIXING AND HANDLING

Usual precautions of handling chemicals should be observed. For further information on storage and handling please refer to the product MSDS.

INTERNATIONAL SHIPPING REFERENCES

Transportation of JVK Clean 130 is not restricted by any regulatory agency.

PACKAGING

The product is packed in 55 gal steel drum, or in bulk (20 - 25MT) tankers.

MSDS

Material Safety Data Sheet is available upon request.


JVK RESOURCES PTE. LTD

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.